Phone Line controller PIC 16F84A
Did you wonder how to remote control from along distance? why don’t you try Phone Line controller. The device connects to the phone line and has a relay as an output switch. The administrator would then call-in the device, log in with the password, and check the state of your house hold or any other electronic device, turn it on or off, change password or some other settings. This project based on microcontroller PIC 16F84A
“The administrator should call-in the device from another telephone. After a few (configurable amount of) rings, the controller will pick-up the line and answer with a beep. After the beep the administrator must enter 4-digit password onto the keypad of his phone (DTMF). This must be done in 6 seconds. If the password is not entered in 6 seconds or wrong password has been entered, the device will beep and hang up. You can call it again now.”
tag: Phone controller, Remote controlling, PIC project link
Related posts:
- PIC DTMF Phone Dialer
This project is a dialer box that connects to the phone and can be used to store and dial... - Simple GSM controller
If you need GSM controller but you are not familiar with microcontrollers then this project is for your. The... - AVR Phone Recorder and Telephony Platform
This ATmega32-based project describes the implementation of a phone line audio and event recorder originally devised for technical support... - Home Automation Using Mobile Phone
This project shows you how to implementing your own Web/WAP enabled home automation system. It will allows you to control... - PIC Wireless Servo Controller
The wireless servo controller project build to control of two servo motors wirelessly. It can be use as wireless...
Search terms:
16f84a projects, alarm clock project using 16f84a, Phone line controller, pic16f84a telephone project
