Hands-On FPGA Based Digital Oscilloscope
Let’s build a simple digital oscilloscope.
- Single channel 100MHz/100MSPS (100 mega-samples-per-second)
- RS-232 based (we’ll look into USB too)
- Inexpensive!
A simple digital oscilloscope recipe
Using parts from KNJN.com, here are the basic items of our recipe.
- 1 x Pluto FPGA board, with TXDI and cable (item#1121, $39.95)
- 1 x Flash acquisition board (item#1205, $39.95)
- 1 x BNC (item#1250, $4.95)
- 1 x Nylon standoffs (item#1270, $0.95)
- 1 x Male/female connectors 2×8 (item#1275, $2.95)
That’s about $88.75 so far. link
Related Item
Related posts:
- Digital Oscilloscope, AT90S8535
Project description: We chose to construct a digital oscilloscope as our final project for this course. The skills involved... - AVR Digital Clock Output to Oscilloscope
Commonly, electronic hobbyist use LDC or 7 segments or LED as display for their digital clock project. But Emilio... - Digital GLCD Oscilloscope
This portable Oscilloscope project uses Graphical LCD screen, 64*128 pixel dots (GDM12864A with KS0108 processor or other compatible) as... - Microcontroller AVR Oscilloscope
by Vassilis Serasidis This is one of great project based on AVR microcontroller. It use ATmega 32 as processor and... - PIC Minimalist Oscilloscope 08M Project
This Minimalist Oscilloscope project built using Nokia 5165 LCD and PicAxe 08M microcontroller. The scope will wait for a...
Search terms:
digital oscilloscope in pic microcontroller, FPGA oscilloscope project
