Geiger Digital Meter Adapter
This PIC16F84 based adapter counts the radioactive particles which is detected by Geiger counter. The result will be displayed at LCD. The first line will show count per second (CPS) or count per minute (CPM) while the second line will show equivalent radiation level. The adapter counts the radioactive particles by connecting to the Digital Output of the analog Geiger counter.
The Digital Meter adapter is one of three adapters. It can be connected to the Digital Output. There is a RS-232 Adapter for connecting the analog meter to a PC. This allows the radiation detected by the Geiger counter to be graphed onto the PC and saved into files.
Digital Meter Adapter
Project Detail and Documentation
imagesco.com
Related Item
Related posts:
- AVR Digital Counter
Another cool microcontroller project from jesper. Counter measurer using microcontroller AT 90S2313, you can use ATtiny 2313 to replace... - Digital Level Meter
The purpose of MEMS ( micro-electromechanical systems) accelerometer based digital level meter prototype is to replace the ‘Spirit Level’ commonly... - Humidity Meter for Soils
There are some ways to measure humidity in soils, which are different and more difficult than measuring relative humidity... - Multifunction Digital Thermometer
This instructable will show you how to create a multifunction platform with a thermometer, chronograph (count up timer), count down... - AVR RPM Meter with KMI15/1 Rotational Speed Sensor
If you want to build a RPM meter project based on Microcontroller AVR? Check out this RPM Meter with...
