Electronic Distance Meter based on Microcontroller 68HC908QY4
Measure distance while riding bicycle. Direct display in meter unit. Battery operated with Nitron 68HC908QY4, 16-pin MCU created by Wichit Sirichote from Thailand
This project demonstrates the use of 16×1 line LCD module to interface with Nitron 16-pin MCU, 68HC908QY4. The original idea came from when he was wondering how long the distance between his house and the park.His son ridden bicycle while he was walking along him. He look at the bicycle wheel, and thought may be he can measure distance with the help of wheel rolling. The week before he brought a magnet from BaanMor, it was the rare earth magnet. he thought why don’t have the reed switch as the sensor and use the magnet tied to a wheel. Detection of rolling is then made by proximity effect, when the magnet close to the reed switch. This close/open reed switch contact can use to make on-off signal. I chose MCU from Motorola, a 16-pin 68HC908QY4 for counting the pulse signal produced by reed switch.
Link: source
Related posts:
- POV Globe Using Arduino
- Electronic Speed Controller based on PIC microcontroller
- AVR RPM Meter with KMI15/1 Rotational Speed Sensor
- Electronic Church Bell Controller based on Microcontroller AVR
- Dot Matrix Scrolling Sign based on Microcontroller AVR
arduino distance meter, motorola usb wireless transmitter microcontroller, microcontroller based on ultrasonic distance meter, mcu based project, IR led for Electronic Distance Measurement, how to measure distance eletronic circute, electronics magazine based on microcontroller, electronic distance meter
